Every fisherman can learn to make accurate and smooth molds, which will greatly improve hunting results. We, the professional fishermen from the Fishmak Store, are ready to share the basic tips – from choosing the right ball to properly prepare it. These comprehensive recommendations will help you, regardless of the fish you follow.
Choose a roll of right
Preparing your gear will not help correctly if you have chosen a wrong ball for specific conditions. What you need to pay attention first:
- Fishing type. For example, hunting from the beach or boat, bottom or floating hunting, winter fishing, and so on. The essential characteristics of your equipment will rely on this, such as durability, temporary storage, energy, etc. In one case, you will need the strongest ball of large and large density, and in another case – resistance to cold ice fishing models;
- Fish type. To get a small and mobile prey like the green sun or the checker, you will need the lighter and the most sensitive model, while in the large tuna or sailor fish – strong and durable, able to withstand loads. For example, you will find in our store many of the rollers of solid fish fish for sale, which are specially designed for these difficult fish;
- Water body type. Consider whether you are hunting in the open sea or in a confined area with a lot of algae and obstacles. Depth, power of currents, water salinity, etc. also play an important role.
The main properties of the reel are: type, energy, brake system, temporary storage capacity, size, gear ratio, etc. Before purchasing it, it is recommended to consult with specialists in a fishing store – will also help you choose a model that complements your equipment set and provide the maximum balance.
Preparing friction and modifying the tension line
The scope of casting and accuracy is directly dependent on the correct preparation of the friction system. With the correct modification, the hunter will be able to control the launch of the fishing line and prevent it from breaking during the prey of the tremors and the formation of the knot. This is especially important when hesitation in fish. How to control friction:
- Friction must be tightened so that the line moves in the maximum resistance. If you go beyond that, you increase the possibility of a break.
- Do tension examine? If you drag the line by hand, you should move smoothly, then the irritation is a bad sign;
- When hunting for aggressive and active predators, it is recommended to relieve clouds.
Some models also have a tension officer. The correct preparation ensures smooth casting and full control of the taste. To check this parameter, link the taste and raise the penis to a vertical position. Then he freed and watched it while the line collapses and the temptation falls. There are three possible results:
- If the fall is too slow/the taste does not move, then stress must be reduced;
- If the fall is smooth and fixed, the setting is correct;
- If the temptation decreases very quickly and the line is interlocking, then you need to increase tension.
The appropriate casting technique
Many of this depends on the fishing technology used. But there are general recommendations that increase the chances of successful casting:
- Correct and comfortable fist. The hand should be a little comfortable, and this will ensure soft movements. Hold the fishing line with your finger. This will help control tension (smooth operations);
- Place the proper fishing bars. The optimum corner of a successful rum is 45 degrees. First, make the smooth decline in building speed. The fist should be firm, but it is not excessively tight;
- Test various casting techniques depending on the conditions. For example, sometimes the side actors team is the best solution, while in another position, the general expenses/face/face/roll may be a more effective roll;
- Smoothly release the fishing line as imagined. Do not make sudden movements and control of the process;
- Check on bail with a ball before dumping.
- When the taste is in the water, you need to reduce the font tension. This will help avoid stumbling/ installation.
However, the most important thing is regular practice and gain experience. Both improvement in one technique and test several patterns in different types of water bodies, taking into account their details, will help.
